Tube Pump Product Introduction
There are two kinds of tube pump：Water ring type，Oil free type，
Water ring pump suitable for use in a mine is deep, long distance underground extraction to use.There are 2 types of water ring type，one of is 2SK-1.5，This kind of pump suction volume per minute 1.5m³，the other is 2SK-3.0，This pump is swept volume per minute 3.0m³.
The mine shaft tube is along the wall during installation，Laying way and the shaft power cable laying in the same way.and underground tube, single tube is along the roadway hanging installation.Hang on wall of roadway tube branch box.
Tube Pump to be installed indoors, pump room should be set inside the pump room near the measure, the ground, underground, area of not less than 6 m2. Pump, pump installation see the pump specifications.
The main characteristic of tube pump station：Large swept volume, low noise, use of circulating cooling water, don't need to add vacuum oil, no maintenance.tube pump installed directly in the control cabinet and responsible for the individual monitoring-station of the underground to monitor gas to the gas analysis room.
Tube Pump Parameters
（1）Voltage：380V±10%，three phase 50Hz AC；
（2）Total power ：6KW；
（5）Relative Humidity：≤90% 。